Dwell-time-driven solidification and multiscale microstructural evolution in CMT-WAAM Inconel 625: correlation with mechanical, wear, and corrosion performance

Loading...
Thumbnail Image

Journal Title

Journal ISSN

Volume Title

Publisher

Elsevier

Abstract

Interlayer dwell time is a critical but often under optimized parameter in wire arc additive manufacturing (WAAM), as it governs heat accumulation, solidification kinetics, solute redistribution and the final performance of deposited alloys. In this work, Inconel 625 wall structures were fabricated by cold metal transfer (CMT) based WAAM using interlayer dwell times of 10s, 50s and 90s. A sequentially coupled thermo-mechanical finite element model, with experimentally validated thermal predictions, was combined with numerical stress-distortion analysis, multiscale microstructural characterization, tensile testing, wear analysis, and electrochemical corrosion evaluation. The results show that a short dwell time intensifies thermal accumulation, extends the mushy zone and promotes Nb/Mo segregation into interdendritic Laves-rich regions. Increasing the dwell time to 90s enhanced heat extraction, reduced the solute boundary layer thickness and refined the solidification structure, decreasing the primary dendrite arm spacing (PDAS) from ∼40 to ∼15 μm and the grain size from ∼610 to ∼180 μm. This refined and chemically more homogeneous microstructure increased hardness from 225 to 290 HV0.2 and improved tensile performance through combined solid solution, grain boundary, dislocation and precipitate strengthening. The 90s condition also exhibited superior tribological response, with the wear mechanism transitioning from severe oxidative-delamination wear to milder oxidative-abrasive wear. Corrosion resistance in 3.5 wt.% NaCl improved markedly with dwell time, as the corrosion current density (icorr) decreased from 71.40 to 22.50 nA/cm−2, the corrosion rate decreased from 27.86 × 10−3 to 8.77 × 10−3 mpy, and the pitting potential increased from 290 to 550 mV. These findings establish interlayer dwell-time control as an effective route for simultaneously improving dimensional stability, microstructural integrity, strength, wear resistance and corrosion performance in WAAM Inconel 625. © 2026 Elsevier Inc.

Description

Citation

Mishra, R., Raj, A., Usha, Y., Haldar, N., Das, Bimal, Chinthapenta, V., Ogawa, K., & Imam, M. (2026). Dwell-time-driven solidification and multiscale microstructural evolution in CMT-WAAM Inconel 625: Correlation with mechanical, wear, and corrosion performance. Materials Characterization, 240. https://doi.org/10.1016/j.matchar.2026.117106

Collections

Endorsement

Review

Supplemented By

Referenced By